Warhammer Marauders from Bloodreavers

Recently I won an Ebay auction for the 20 Bloodreavers in the Age of Sigmar Starter set.  I had been bidding the same low price for approximately eight months, so I was pretty pleased!

The goal for these figures is to make a Khorne marked marauder regiment for Warhammer Fantasy Battle, which will mean some conversions are needed to get them to rank up.  The models actually fit rather well on 25mm squares, but as they were designed to be skirmishers, they have axes and swords and arms swinging around every which way and it will certainly be a puzzle to get them all into the regiment.

Comparison with my converted Reaper Chaos Champion

Speaking of puzzles, the figures are very cleanly cast (as one would expect from contemporary injection molded figures), but as they are designed with computers for molding, they have what seem to be unusual cut lines. For example the unit champion figure (you get two) has three pieces, body, arm, and unusually, a combined head/arm piece.  Receiving the figures stuffed in a small bag as I did made for a challenging cleaning session, as I tried to match up the various parts.

Comparison with a standard Marauder and between "Franz" and "Jean"

As compared to the older Warhammer Chaos Marauders, you can see that these figures are approximately the same height and mass, however, they are proportioned slightly differently, in that the newer figures have slightly shorter legs, smaller heads and hands, and broader chests... all of which makes them seem slightly more "realistic", at least as much as blood crazed cannibal barbarians can be realistic!

As compared to the older Warhammer Chaos Warriors, you can see that they are again around the same height and mass; however, the Bloodreaver is broader in the shoulder (making allowances for the armor and fur cape), and obviously more chaotic in pose!

Anyway, I will post more pictures when I get the regiment built up, and eventually painted.  With all of that skin, these figures seem suited for a cream colored zenithal highlight...

Necromunda Sniper

Back in the good old days of GW mail order bitz orders, my favorite thing to do was to build custom units created from scouring the catalogs for various alternate figures.  These were still aimed at the usual army book or codex entry, but might feature unique heads, or weapons or alternate figures.  Making the unit for cheaper than retail price was a particular thrill. (E.g. Empire pistoliers made from the Empire command sprue and bitz heads)  My first Steel Legion squad was built in this way, and consequently it featured the elusive Necromunda sniper figure as a regular guardsman.

At the time, I intended to have just the one Steel Legion squad, used as an Armored fist squad in my otherwise foot bound army (made mostly from Catachan plastics, Cadians not yet being available).  Consequently, rather than buy a Steel Legion boxed set, I ordered various blisters and bitz to build the squad, and ended up using the Necromunda sniper figure as an alternate guardsman.  Currently the figure goes for relatively silly amounts on Ebay (One auction in progress has it at £9), but I bought the figure for $4 or whatever the bitz price was.

Picture from Collecting Citadel Miniatures Wiki

If you examine the figure closely, as I have while painting it, it becomes clear that this figure was sculpted by someone other than a Perry, and further, that it was probably a trainee piece.  The conclusion can be reached by the somewhat uncomfortable pose of the figure, and because the equipment is clearly not the same as used on the other figures of the range, particularly the bedroll.

Comparison shot of the rear of the figure and some standard Steel Legion troopers.

(Photo from bcderue's bucket, found via Google)

Since the Fanatic range tended to release more dubious sculpts from trainees or hired sculptors, it makes sense then that the Necromunda Sniper came out under that banner (as a Necromunda Sniper) rather than as some sort of supplementary blister for the Steel Legion.  Indeed, at the time, the only snipers that the IG had were ratlings, which were later effectively replaced by regiment specific sniper sets, themselves replaced by the Catachan and Cadian command boxes (which includes sniper arms).

In any case, in this man's army, he is just a rifleman, and I have another figure converted from a heavy bolter gunner which I use as a sniper.

INQ28 - Venator part 2

Way back in December of 2014, I showed off a converted Venator figure I made after being inspired by JB the "Asslessman" of Leadplague (an excellent blog you should already be reading).

After quite some time, I finally finished painting the figure, and even better, this weekend I sprayed it with matte sealer so it can be shown off in all of its gritty glory.

Also of note is the base, which marks my first completed INQ28 base.  I decided to go with a fairly typical ruined industrial type of base, which you can see here.

I have a couple of others made up for other figures, but I think that I will be buying the new Sector Imperialis bases to save time.  Adding a few details on top of a base is much easier than creating them all from scratch!